Buy GW50A Automatic Bending Machine need to know three important details

First, choose well-known, large-scale manufacturers. Manufacturers need to carefully choose, now often promote how their manufacturers how well the network, but this is only one-sided on the network, to really buy it,GW50A  Automatic Bending Machine should personally lead manufacturers to take a look, understand the manufacturer's production capacity, environment , as well as the level of quality of service and staff personnel, summary judgment by the manufacturers of these indirect authenticity.

Second, remember not to forget the service. Many customers after the purchase of equipment, there is always a problem in the device will be remembered after sales service, but this time to think of it is probably too late. Such large-scale equipment GW50A  Automatic Bending Machine be sure to consult the manufacturer service and things that inevitably occur in the use of small problems, if they have these little problems, I am afraid will be very troublesome. But if you have a service that you can reduce a lot of trouble, they will help you solve the problem.

Third, check the quality of the equipment on the spot. GW50A  Automatic Bending Machine  needs to check the quality of the spot, it is best to let the staff help operate it, in the course of device operation, if a problem is found, must be promptly replaced or returned. The most important thing is to check the various parts of the device parts, to see which parts manufacturer out. If the device is damaged after a part, it is best to replace the same parts manufacturers to ensure the normal operation of the device.

Over to you about the three basic things about buying GW50A  Automatic Bending Machine needs attention. Steel bending machine such large equipment cost a lot of money, any one industry will not easily funded, certainly in many aspects of the investigation after the final determination of an ideal device, in particular, should choose the time and attention to detail issues.

GW50A Automatic Bending Machine，GW42D Automatic Bending Machine，GW42E Automatic Bending Machine: GW50A Automatic Bending Machine operating specifi...

GW50A Automatic Bending Machine，GW42D Automatic Bending Machine，GW42E Automatic Bending Machine: GW50A Automatic Bending Machine operating specifi...:  1, Placed GW50A  Automatic Bending Machine , should choose a more smooth, solid, broad place before and after symmetrical triangular wooden...

GW50A Automatic Bending Machine operating specifications

 1, Placed GW50A  Automatic Bending Machine , should choose a more smooth, solid, broad place before and after symmetrical triangular wooden wedge.

 2. Do not place the power cable to GW50A  Automatic Bending Machine 's buttons, you should have received an additional control power switch. The motor should be grounded, ministries wire, electrical equipment should be well insulated.

 3, The operation is prohibited other personnel into the operating area, running the motor, hydraulic pumps and other transmission parts found abnormal noise should stop after cutting the power for maintenance. Operation prohibit cleaning, lubrication.

 4, We must add a little oil before use. Not use less than blocked shaft GW50A  Automatic Bending Machine  diameter bend, bend steel must first straightening work shall not be bent.

 5, After work, turn off the power, mechanical cleaning and maintenance work. If outside, before leaving after the power switch box should be locked.

 6, Should pay attention to before starting the position and direction of bending steel protruded prevent open the wrong wounding.


 7, The work should be checked before each transmission parts fastening bolt through the rear idle test confirmed safe before doing any work.

 8. Replace the bent pin and a fixed pin midnight on the turntable, GW50A  Automatic Bending Machine  should cut off the power to stop the rotation after.

Multifunction power cutters

Multifunction power cutters

GW32 Automatic Bending Machine

GW32 Automatic Bending Machine

GW42E Automatic Bending Machine

GW42E Automatic Bending Machine
Introduction:
40mm steel bar bending machine is applied to bend common plain carbon steel, hot rolling round steel, deformed steel bar, flat steel and square steel automatically. Being a renowned automatic bending machine factory in China, our products share large national and international markets, as it is with low energy consumption, high efficiency, easy operation and maintenance and good working performance. We are devoted to be the leading manufacturer of rebar bender worldwide.
Advantages:
1. 40mm steel bar bending machine is with locating pins, which ensures precise and accurate bending angle.
2. It has long working life, as there is a breaker in motor to help prolong motor working life.
3. It works with high speed and low noise.
4. Fully enclosed noise transmission box, high and low speed adjustable.
5. It is with advanced technology, compact structure, high rigidity, simple operation, high safety and stable performance.
6. Automatic bending machine adopts thicken steel plate and high power intermediate speed GB electric motor.
7. It uses helical gear which has strong bending force.
8. Working dish, insert seat and plug wheel are made of 45#, which are extra thick and treated with high frequency.

GW50A Automatic Bending Machine，GW42D Automatic Bending Machine，GW42E Automatic Bending Machine

GW42D Automatic Bending Machine
Introduction:
40mm steel bar bending machine is applied to bend common plain carbon steel, hot rolling round steel, deformed steel bar, flat steel and square steel automatically. Being a renowned automatic bending machine factory in China, our products share large national and international markets, as it is with low energy consumption, high efficiency, easy operation and maintenance and good working performance. We are devoted to be the leading manufacturer of rebar bender worldwide.
Advantages:
1. 40mm steel bar bending machine is with locating pins, which ensures precise and accurate bending angle.
2. It has long working life, as there is a breaker in motor to help prolong motor working life.
3. It works with high speed and low noise.
4. Fully enclosed noise transmission box, high and low speed adjustable.
5. It is with advanced technology, compact structure, high rigidity, simple operation, high safety and stable performance.
6. Automatic bending machine adopts thicken steel plate and high power intermediate speed GB electric motor.
7. It uses helical gear which has strong bending force.
8. Working dish, insert seat and plug wheel are made of 45#, which are extra thick and treated with high frequency.
Specifications of 40mm steel bar bending machine:
Item GW42D
Bending Capacity
Rod ≤Φ40mm
II Rebar ≤Φ36mm
Working dish size Φ360
Motor 3KW-50HZ-3P
Spindle speed High 10rpm Low 7rpm
Weight 340kg
Dimension(L×W×H)(mm) 910×730×810
Motor Optional 220V/415V/440V 50HZ/60HZ
Related equipments/accessories:
Automatic bending machine is composed of machine body, bending part, bending accessories, electric motor, electric appliance, control panel and foot pedal.